Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Book Your Installation

What're your thoughts about How to Install a One-Piece Shower Unit?

An effective shower installation needs mindful planning and also a lot of job. In many cases, you will certainly need to do 3 types of tasks: mounting walls, setting up the plumbing, and completing wall surfaces.

Different Kinds Of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower system can be connected to the bathroom faucet according to your requirement, as well as the water temperature can be changed via the faucets. Push-on mixers are cheap and also incredibly basic to install. Nevertheless, although the tube connection is straightforward, it is easily removed. In addition, it is troublesome to readjust the temperature.

Bath/Shower Mixer: The pipe and spray of this kind of shower are incorporated with a bath mixer faucet, and also the temperature can be readjusted through the bathroom faucets. It is a very affordable option as well as no added plumbing is involved. However, the bath/shower mixers likewise deal with troublesome temperature level control alternatives.

Manual Mixer: The pipe and also spray of a manual mixer shower unit belong of the wall surface unit and the cold and hot water products are attached to a single shutoff The temperature level and also pressure of the water are regulated via either one or a variety of knobs (in a lot more pricey showers). Although temperature level control is much easier in manual mixer types, they are a lot more pricey than the formerly mentioned mixers. They also need extra plumbing of cold and hot water pipelines.

Thermostatic Mixer: The hose and spray of this shower type are a part of the wall surface system as well as the cold and hot water products are attached to a solitary shutoff below too. It is complete with a built-in stabiliser to self-adjust the water temperature and to prevent it from ending up being as well hot. One of the most significant advantages of a thermostatic mixer shower type includes practical temperature control. Nevertheless, it is the most expensive of the different mixer options.

Power Shower: A power shower is a single unit containing a powerful electrical pump that can modifying both the water stress and also temperature level. This kind of shower can be fitted if there is supply of water from a cold water cistern and a warm water cyndrical tube. A power shower makes the change of both stress and also temperature level easy. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is supplied by a combination boiler under mains pressure.

Electric Shower: An electric shower is plumbed into a mains cold water supply and it heats the water electrically. It is essential to note that for this shower type to be installed, the mains pressure requires to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The device permits the temperature level and also stress to be readjusted via a knob. Models with temperature stabilisers are better as they stay unaffected by other taps elsewhere in use within the home. A major disadvantage of electric showers is that the control knob only enables the choice of high temperatures at less pressure, or lower temperatures at a greater stress. This is troublesome in the winter when the spray is commonly weak as well as the mains water is chillier. However, this problem is tackled in some models which are readily available with a winter/summer setup.

The Majority Of Usual Errors

Breaching or disregarding neighborhood code constraints.

Using pipes that are also tiny.

Affixing copper to galvanized without utilizing a brass or dielectric fitting between both.

Not making use of tape or pipeline compound at threaded joints.

Not leveling your fixtures when installing them.

Not installing an air void filling up for fixtures.

Cutting supply stub outs also brief to set up the shutoff valves onto after the finished wall surface remains in location.

Not properly straightening tubes into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will cause a leakage.).

When turning the water back on in your home, constantly run the outside hose shutoff or flush your toilets to hemorrhage dirt and air from the lines. This particles can cause troubles in your sink faucets and also other plumbing trim.

Preparation.

To start with, you need to choose the sort of shower that you want to install. It is necessary to determine whether the picked shower can coping with specific systems and can manage a safe degree of water through the central heating boiler. Many shower devices nowadays are created to be flexible to various water stress (such as kept warm water as well as cool mains).
It is additionally essential to take into account the water pressure and also the planning of the piping as well as drainage for the shower.

Technique.

Depending on the kind of shower you desire to install, the shower head need to either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it needs to have a check valve.
Before beginning, it is advisable to mark the positions of the shower head and also control, and to intend the pipe-work included. In addition, the drain system to get rid of the waste water will certainly need to be prepared. Both positions of the cord path and the shower button will likewise require to be thought about if a rapid or electric shower device is being set up.
Use the direction overview supplied with the shower system to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is essential to remove the supply of water. In order to secure the pipes, they ought to be offered a waterproof covering and additionally fitted with isolating valves. The pipelines can then be buried right into the wall surface and glued over to neaten the total look.
Fit the base tray, shower head, and also fittings.
Link the main shower control to the pipes that will be supplying the water (This might call for a female screw thread adapter).
Reconnect the supply of water and also examination the pipes for any kind of leaks, as some might require tightening up.
If you are setting up an electric shower, bear in mind to switch off the power supply prior to making any electrical connections. When these connections have actually been made (there must be advice within the instruction manual), the power supply can be switched back on.

Changing Water Stress to Fit Your Shower.

The cold water storage tank can be raised to a better height (sometimes as little as 150mm (6inches)) by fitting a strong wooden assistance underneath it - perhaps made up of struts and also blockboards. If you pick this alternative, the major and also distribution pipes will also have to be raised to meet the new height of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it has to be attached right into the power supply in order to run.

Piping as well as Drain.

It is best to utilize 15mm diameter supply pipes, and make the runs to the shower as brief and also straight as feasible so regarding preserve maximum pressure and minimise warmth loss. In addition, by reducing using elbows for pipe corners, you can lower the resistance in the flow of the water supply. You can accomplish this by bending the pipelines rather.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm very serious about How to Build a Shower Enclosure for Your DIY Bathroom and I really hope you liked our blog post. Liked our blog posting? Please share it. Help others find it. I treasure reading our article about How to Install a Freestand.

Contact Us Today

Report this page